Provide wireless possibility for your polyurethane one-stop solution

SPC-1031 Polyurea for Waterproof


SPC-1031 polyurea spray material for waterproof can be instant quick curing as if spraying on the surface, the formation of high strength, high elongation, no joint elastic waterproof coating, is a revolutionary leap in traditional coating technology, is currently the most advanced waterproof construction technology.


Spraying polyurea waterproof coating can be widely used in the large-scale building structure, chemical infrastructure, water conservancy and other waterproof engineering, especially exposed to chemical corrosion of water quality engineering.


Item  TypeⅠ  Type Ⅱ
Solid content (%) 99 99
Gel time (s) 20 20
Table dry time (s) 40 40
Tensile strength (MPa) 18 23
Break elongation (%) 375 510
Tear strength (N/mm) 66 77
Adhesion (MPa) 3.6 4.2
Low temperature bending (℃) -35 -40
Water impermeability (0.4MPa, 2h) impervious impervious
Heating expansion rate (%) ≤1.0 0.4
water absorption rate (%) 2.5 2.5
Hardness (shore A) 85~95 85~95
Wear resistance [(750g/750r)/mg] 13 13
Impact resistance (kg.m) 1.0 1.0
Artificial climate aging (2000h) good good
Density (g/cm3) 1.02 1.02
Color can be modulated according to requirement

Note: Due to the difference of field conditions, the actual measured data may differ from the above data.



Recommended film thickness is about 1.5-2.5mm, estimated consumer consumption amount for 2.0-3.0kg/square meters, the amount of nodes, corners and some special parts may than theoretical consumption greater.



The shortest, time is not limited;

The longest, no more than 3 hours



In the process of the use of this product, must wear uniforms, wear goggles, gloves, masks and other protective equipment.



This product should be stored in cool, ventilated, dry coffers in the presence, is strictly prohibited in the rain, sun, cut off from the source of the fire. Keep away from heat and storage temperature should be 10 to 40℃.


This product if not open the original packaging, the storage period is 6 months since the date of production. If over storage period could be tested according to the product standards for inspection, if meet technical requirements can still be used.


This product does not contain organic solvents, can be transported by non dangerous goods. Transport should be no rain, the sun, and should comply with the relevant provisions of the Department of transportation.



A material is 220kg per iron drum.; B material is 210kg per iron drum.

Leave Your Message

Translate »

Submit Your Sourcing Request

Please complete the form below and our customer support team will be in touch with you shortly. Inquiries submitted through this form will receive priority processing over emails.