Complete Flexible Foam Material Solutions

In short: we are the China factory behind the flexible PU foam you sell — earplugs, memory pillows, stress balls, seating and footwear. We supply the matched A + B system, formulate it to your part, and ship from 10 kg trial quantities to container loads, with a batch CoA on every lot and OEM / ODM on request.

  • MOQ from 10 kg
  • OEM / ODM
  • Reply within 24 h
  • Batch CoA
  • Ungated TDS & MSDS
Blue steel drums of SPC blended polyol, component A of the flexible polyurethane foam system

Flexible Foam Materials We Supply for Wholesale & OEM

These are the three systems buyers ask us for most. Each is a complete two-component system — you get the polyol and the matching isocyanate, formulated to your part.

ProductGrade (A + B)What makes it differentReactivity (25°C)Key data
Earplug foam materialSPC-A8025 + SPC-B8025
MDI-based, premixed
Rebound time adjustable 5–80 s — the single spec earplug buyers ask for. Wide processing window, strong foam.Cream 10–15 s · Gel 45–60 s · Free rise 50–80 sRatio A:B = 100:50 · A viscosity 2400 mPa·s · B NCO 26.2±0.5% · hydroxyl value 48
Memory pillow & mattress materialSPC-1015
Slow recovery (viscoelastic)
Temperature-sensitive slow recovery, contours to the body. Consistency tunable soft–firm.Cream 3–5 s · Gel 8–12 s · Tack-free 10–15 sFree rise density 21–35 kg/m³ · high air permeability
Stress-ball & slow-rebound toy materialPU SR-081 + PU ISO 113
Slow rebound, low density
Rebound speed set by the mixing ratio, so you can dial in the squeeze. Good hand feel, low density.Demould 3–5 min · mould temp 35–45°CRatio A:B = 100:37 (B range 28–38) · A viscosity 1050±200 mPa·s · SG 1.03

Typical values from our published technical data sheets. Final density and hardness depend on your formulation, mould and process. Need seating or footwear grades instead? See our flexible foam technical page for SPC-1009 and PU-ZDHR040, or browse the full range. Full TDS on request — no login required.

How to Order: From Sample to Bulk

1

Tell us the part

Send the product you make (earplug, pillow, toy, seat) plus target density, hardness and volume.

2

Free sample + TDS

We ship a sample of the matched system with the full TDS and MSDS — no login wall.

3

You trial & we tune

Run it on your line; we adjust ratio, reactivity and density to your process.

4

Bulk order + CoA

Confirm the formula and scale up. Every lot ships with a batch Certificate of Analysis.

What We Can Do For You

Custom formulation

Density, hardness, reaction profile and colour built to your part — not a catalogue item forced to fit.

Low MOQ from 10 kg

Trial quantities so you can validate before committing to a container.

Your brand on the drum

OEM / ODM: private-label drum marking and packaging on request.

Matching A + B supplied

We supply the polyol (component A) and the matching isocyanate (component B) as one system.

Batch CoA every lot

Documented, repeatable quality — not drum-to-drum lottery.

REACH & RoHS docs

Export documentation prepared for EU and worldwide compliance.

China-Based Factory, Not a Trading Company

We have run our own polyurethane raw-material plant in Wuxi since 2010, with in-house chemical engineers who formulate and blend the systems we sell. That is why we can change a formulation for your line instead of telling you what is in stock.

Because we blend every component ourselves — polyol, catalyst, silicone surfactant and additives — the same core chemistry covers everything from a 5-second-rebound earplug to a slow-contouring memory pillow. Buyers from around the world visit the plant to audit it before they qualify us.

Frequently Asked Questions

What is your minimum order quantity?
From 10 kg for custom formulation trials. That is deliberately low so you can validate the system on your own line before scaling to drum or container quantities.
Do you supply both components, or only the polyol?
Both. We supply the blended polyol (component A) together with the matching isocyanate (component B) as one system — for example SPC-A8025 + SPC-B8025 at 100:50 for earplugs, or PU SR-081 + PU ISO 113 at 100:37 for slow-rebound toys.
Can you match a foam I am already buying?
Usually yes. Send us the current TDS or a sample of the finished part with your target density, hardness and cycle time, and our engineers will work back to a matching formulation.
Do you do OEM / ODM and private label?
Yes — private-label drum marking and packaging on request, on top of a formulation built to your part.
How fast do you reply to a quote request?
Within 24 hours. To get a useful first answer, include the product you make, target density and hardness, your process (moulded or slabstock, low- or high-pressure machine) and your annual volume.
Do I have to register to get the TDS and MSDS?
No. Technical and safety data sheets are provided on request with no login wall.

Related Flexible Foam Pages

Get a Wholesale Quote & Free Sample

Tell us the product you make, your target density and hardness, your process and your volume — our engineers reply within 24 hours with a formulation, the full TDS and a sample offer.