Foam Chemical Supplier — All PU Raw Materials
In short: we manufacture every polyurethane raw-material family from one plant — rigid, flexible, spray, integral-skin, elastomer and polyurea — plus the individual components (polyols, catalysts, surfactants, flame retardants) and the matching isocyanate. Blended in our own plant in China since 2010. MOQ from 10 kg, batch CoA on every lot.
- 6 material families
- MOQ from 10 kg
- Manufacturer since 2010
- Batch CoA
- Ungated TDS & MSDS
Choose Your Foam Material Family
Six families, one plant. Start from the part you make — each page carries the real grades, densities and reaction data from our published TDS.
Rigid Foam
Insulation cores for sandwich panels, refrigerators, freezers and cold rooms.
λ ≤21 mW/(m·K) · ≥92% closed cell · 35–43 kg/m³View systems →Flexible Foam
Comfort foams for mattresses, sofa cushions, moulded car seats and footwear.
Ball rebound ≥45% · comfort factor ≥2.8 · 40–45 kg/m³View systems →Spray Foam
Two-component spray systems for building insulation, roofing and coatings.
λ ≤23 mW/(m·K) · open-cell 9–11 kg/m³ · HFO & water-blownView systems →Integral-Skin Foam
Self-skinning moulded parts: armrests, grips, steering wheels, soles.
Ratio 100 : 42–45 · cream 17±1 s · low-density skinned partView systems →PU Elastomer
Solid cast elastomers: wheels, rollers, sieve plates, seals and wear parts.
Shore A 84±2 · 100% modulus 5.4 MPa · MOCA castView systems →Polyurea Coatings
Sprayed elastomeric membranes for waterproofing and protective coatings.
Gel ~20 s · tensile 18–23 MPa · elongation 375–510%View systems →Individual Components We Also Supply
Buying components rather than a finished system? We blend these ourselves, so you can order them on their own.
Why Buy Your Foam Chemicals From Us
Formulated in-house, not resold
We blend polyol, catalyst, surfactant and flame retardant ourselves — so the system fits your line.
Every foam family from one plant
Rigid, flexible, spray, integral-skin, elastomer and polyurea — one supplier, one set of paperwork.
Compliant blowing agents
Cyclopentane, HFO and 100% water-blown routes for the EU and North America.
Low MOQ from 10 kg
Trial quantities so you can validate before committing to a container.
Batch CoA on every lot
Documented, repeatable quality — not drum-to-drum lottery.
Ungated TDS & MSDS
Full technical and safety data sheets on request — no login wall.
Frequently Asked Questions
Which foam family do I need?
Do you supply both components?
What is your minimum order quantity?
Are you a manufacturer or a trading company?
Can I get the TDS, MSDS and a free sample?
Not Sure Which System You Need?
Tell us the part you make and the properties you are targeting — our engineers will point you to the right family and reply within 24 hours with a formulation, the full TDS and a sample offer.
